Multidisciplinary Journal of Science and Technology

ADAPTIVE REGULATION OF THE MANIPULATOR'S MOVEMENT SPEED DEPENDING ON THE DISTANCE TO THE PERSON AND THE LEVEL OF LOAD ON THE ACTUATOR

Vladyslav Yevsieiev1

1Department of Computer-Integrated Technologies, Automation and Robotics, Kharkiv National University of Radio Electronics, Ukraine

Svitlana Maksymova1

1Department of Computer-Integrated Technologies, Automation and Robotics, Kharkiv National University of Radio Electronics, Ukraine

Svetlana Starykova1

1Department of Computer-Integrated Technologies, Automation and Robotics, Kharkiv National University of Radio Electronics, Ukraine

Jafar Ababneh2

2Cyber Security department, Faculty of Information Technology, Zarqa University, Zarqa, Jordan

Keywords: Adaptive Control, Manipulator, Fuzzy Logic, Speed Of Movement, Distance To A Person, Load, Executive Body, Real-Time Control, Robotics, Safe Interaction.

---

Abstract

The article presents an approach to adaptive control of the manipulator speed based on fuzzy logic, which allows taking into account the distance to the person and the level of load on the executive body. The proposed model forms control actions in accordance with the logic of safe human-robot interaction, providing a dynamic change in speed to increase efficiency and safety. The system uses a set of linguistic rules and triangular membership functions to process fuzzy input data. The simulation results demonstrate the stable behavior of the system and confirm the feasibility of using fuzzy approaches in controlling the movement of manipulators in variable conditions. The developed approach has high potential for implementation in robotic systems that operate in close proximity to a person. Development prospects include integration with machine learning and real-time use on embedded platforms.

---

References

1. Demska, N., & et al. (2025). Analysis of Methods, Models and Algorithms for a Collaborative Robots Group Decentralized Control. ACUMEN: International journal of multidisciplinary research, 2(2), 235-249.

2. Chala, O., & et al. (2025). Mathematical Model Based on Multi-Agent Reinforcement Learning (MARL) and Partially Observable Markov Decision Process (POMDP) for Modeling Cargo Movement for a Mobile Robots Group. Multidisciplinary Journal of Science and Technology, 5(4), 480-489.

3. Yevsieiev, V., & et al. (2024). Human Operator Identification in a Collaborative Robot Workspace within the Industry 5.0 Concept. Multidisciplinary Journal of Science and Technology, 4(9), 95-105.

4. Nevliudov, I., & et al. (2025). A Small-Sized Robot Prototype Development Using 3D Printing. acta mechanica et automatica, 19(1).

5. Yevsieiev, V., & et al. (2024). Capturing Human Movements in Real Time in Collaborative Robots Workspace within Industry 5.0. Journal of universal science research, 2(10), 232-247.

6. Maksymova, S., & et al. (2025). A Mathematical Model Development for an Automated Control System for Packaging and Sorting Products Closed Area. Multidisciplinary Journal of Science and Technology, 5(5), 149-164.

7. Lyashenko, V., Abu-Jassar, A. T., Yevsieiev, V., & Maksymova, S. (2023). Automated Monitoring and Visualization System in Production. International Research Journal of Multidisciplinary Technovation, 5(6), 9-18.

8. Baker, J. H., Laariedh, F., Ahmad, M. A., Lyashenko, V., Sotnik, S., & Mustafa, S. K. (2021). Some interesting features of semantic model in Robotic Science. SSRG International Journal of Engineering Trends and Technology, 69(7), 38-44.

9. Sotnik, S., Mustafa, S. K., Ahmad, M. A., Lyashenko, V., & Zeleniy, O. (2020). Some features of route planning as the basis in a mobile robot. International Journal of Emerging Trends in Engineering Research, 8(5), 2074-2079.

10. Maksymova, S., Matarneh, R., & Lyashenko, V. V. (2017). Software for Voice Control Robot: Example of Implementation. Open Access Library Journal, 4(8), 1-12.

11. Sotnik, S., & et al.. (2022). Modern Industrial Robotics Industry. International Journal of Academic Engineering Research, 6(1),. 37-46.

12. Lyashenko, V., & et al.. (2021). Modern Walking Robots: A Brief Overview. International Journal of Recent Technology and Applied Science, 3(2), 32-39.

13. Sotnik, S., & et al.. (2022). Overview of Innovative Walking Robots. International Journal of Academic Engineering Research, 6(4), 3-7.

14. Sotnik, S., & et al.. (2022). Agricultural Robotic Platforms. International Journal of Academic Engineering Research, 6(4), 14-21.

15. Lyashenko, V. V., Matarneh, R., Kobylin, O., & Putyatin, Y. P. (2016). Contour Detection and Allocation for Cytological Images Using Wavelet Analysis Methodology. International Journal, 4(1), 85-94.

16. Sotnik, S., & Lyashenko, V. (2022). Prospects for Introduction of Robotics in Service. Prospects, 6(5), 4-9.

17. Babker, A. M., Altoum, A. E. A., Tvoroshenko, I., & Lyashenko, V. (2019). Information technologies of the processing of the spaces of the states of a complex biophysical object in the intellectual medical system health. International Journal of Advanced Trends in Computer Science and Engineering, 8(6), 3221-3227.

18. Lyashenko, V., Ahmad, M. A., Sotnik, S., Deineko, Z., & Khan, A. (2018). Defects of communication pipes from plastic in modern civil engineering. International Journal of Mechanical and Production Engineering Research and Development, 8(1), 253-262.

19. Sotnik, S., Matarneh, R., & Lyashenko, V. (2017). System model tooling for injection molding. International Journal of Mechanical Engineering and Technology, 8(9), 378-390.

20. Kots, G. P., & Lyashenko, V. (2012). Banking sectors of the economies of European countries in the representation of statistical interrelation between indices that characterize their development. European Applied Sciences, 1, 461-465.

21. Куштим, В. В., & Ляшенко, В. В. (2007). Динаміка розвитку банківського сегмента міжнародного фінансового ринку. Фінанси України, (12), 96-105.

22. Maksymova, S., Matarneh, R., Lyashenko, V. V., & Belova, N. V. (2017). Voice Control for an Industrial Robot as a Combination of Various Robotic Assembly Process Models. Journal of Computer and Communications, 5, 1-15.

23. Khan, A., Joshi, S., Ahmad, M. A., & Lyashenko, V. (2015). Some effect of Chemical treatment by Ferric Nitrate salts on the structure and morphology of Coir Fibre Composites. Advances in Materials Physics and Chemistry, 5(1), 39-45.

24. Dobrovolskaya, I., & Lyashenko, V. (2013). Interrelations of banking sectors of European economies as reflected in separate indicators of the dynamics of their cash flows influencing the formation of the resource potential of banks. European Applied Sciences, 1-2, 114-118.

25. Lyashenko, V., Laariedh, F., Ayaz, A. M., & Sotnik, S. (2021). Recognition of Voice Commands Based on Neural Network. TEM Journal: Technology, Education, Management, Informatics, 10(2), 583-591.

26. Ahmad, M. A., Sinelnikova, T., Lyashenko, V., & Mustafa, S. K. (2020). Features of the construction and control of the navigation system of a mobile robot. International Journal of Emerging Trends in Engineering Research, 8(4), 1445-1449.

27. Tahseen A. J. A., & et al.. (2023). Binarization Methods in Multimedia Systems when Recognizing License Plates of Cars. International Journal of Academic Engineering Research (IJAER), 7(2), 1-9.

28. Sotnik S., & et al.. (2022). Key Directions for Development of Modern Expert Systems. International Journal of Engineering and Information Systems (IJEAIS), 6(5), 4-10.

29. Al-Sharo, Y., Abu-Jassar, A., Lyashenko, V., Yevsieiev, V., & Maksymova, S. (2023). A Robo-hand prototype design gripping device within the framework of sustainable development. Indian Journal of Engineering, 20, e37ije1673.

30. Abu-Jassar, A., Hamdan, M., Hamash, K., Boboyorov, S., & Lyashenko, V. (2025, April). Lab Color Model and Contrast Modification as a Tool for Improving the Quality of Medical Images. In 2025 1st International Conference on Computational Intelligence Approaches and Applications (ICCIAA) (pp. 1-7). IEEE.

31. Abu-Jassar, A. T., Attar, H., Amer, A., Lyashenko, V., Yevsieiev, V., & Solyman, A. (2025). Development and Investigation of Vision System for a Small-Sized Mobile Humanoid Robot in a Smart Environment. International Journal of Crowd Science, 9(1), 29-43.

32. Abu-Jassar, A., & et al. (2024). Building a Route for a Mobile Robot Based on the BRRT and A*(H-BRRT) Algorithms for the Effective Development of Technological Innovations. International Journal of Engineering Trends and Technology, 72(11), 294-306.

33. Al-Sharo, Y. M., Abu-Jassar, A. T., Sotnik, S., & Lyashenko, V. (2023). Generalized procedure for determining the collision-free trajectory for a robotic arm. Tikrit Journal of Engineering Sciences, 30(2), 142-151.

34. Attar, H., Abu-Jassar, A. T., Lyashenko, V., Al-qerem, A., Sotnik, S., Alharbi, N., & Solyman, A. A. (2023). Proposed synchronous electric motor simulation with built-in permanent magnets for robotic systems. SN Applied Sciences, 5(6), 160.

35. Yevsieiev, V., & et al. (2024). Data Fusion Research for Collaborative Robots-Manipulators within Industry 5.0. ACUMEN: International journal of multidisciplinary research, 1(4), 125-137.

36. Chala, O., & et al. (2025). Using the Human Face Recognition Method Based on the MobileNetV2 Neural Network in Authentication Systems. Multidisciplinary Journal of Science and Technology, 5(3), 882-895.

37. Yevsieiev, V., & et al. (2025). A human-centric approach to control collaborative robots within Industry 5.0. Multidisciplinary Journal of Science and Technology, 5(5), 351-361.

38. Maksymova, S., & et al. (2024). Comparative Analysis of methods for Predicting the Trajectory of Object Movement in a Collaborative Robot-Manipulator Working Area. Multidisciplinary Journal of Science and Technology, 4(10), 38-48.

39. Yevsieiev, V., & et al. (2025). Development of a program for processing 3d models of objects in a collaborative robot workspace using an HD camera. ACUMEN: International journal of multidisciplinary research, 2(1), 194-210.

40. Tvoroshenko, I., Lyashenko, V., Ayaz, A. M., Mustafa, S. K., & Alharbi, A. R. (2020). Modification of models intensive development ontologies by fuzzy logic. International Journal of Emerging Trends in Engineering Research, 8(3), 939-944.

41. Abu-Jassar, A. T., Attar, H., Lyashenko, V., Amer, A., Sotnik, S., & Solyman, A. (2023). Access control to robotic systems based on biometric: the generalized model and its practical implementation. International Journal of Intelligent Engineering and Systems, 16(5), 313-328.

42. Orobinskyi, P., Petrenko, D., & Lyashenko, V. (2019, February). Novel approach to computer-aided detection of lung nodules of difficult location with use of multifactorial models and deep neural networks. In 2019 IEEE 15th International Conference on the Experience of Designing and Application of CAD Systems (CADSM) (pp. 1-5). IEEE.

43. Lyashenko, V., Tvoroshenko, I., Mustafa, S. K., & Ahmad, M. A. (2020). Methods of using fuzzy interval logic during processing of space states of complex biophysical objects. International Journal of Emerging Trends in Engineering Research, 8(2), 372-377.

44. 1. Jiang, H., & et al. (2025). Predefined-Time Composite Fuzzy Adaptive Control for Flexible-Joint Manipulator System With High-Order Fully Actuated Control Approach. IEEE Transactions on Industrial Electronics.

45. Shan, H., & et al. (2025). Fixed-time self-triggered fuzzy adaptive control of N-link robotic manipulators. Fuzzy Sets and Systems, 498, 109134.

46. Tinoco, V., & et al. (2025). A review of advanced controller methodologies for robotic manipulators. International Journal of Dynamics and Control, 13(1), 1-17.

47. Yilmaz, B. M., & et al. (2025). Fuzzy Logic based adaptive control of robot manipulators driven by BLDC Motors. Journal of the Franklin Institute, 107528.

48. Sun, W., & et al. (2025). Flexible manipulator trajectory tracking based on an improved adaptive particle swarm optimization algorithm with fuzzy PD control. Mechanical Sciences, 16(1), 125-141.

49. Zhang, Y., & et al. (2025). Adaptive control and state error prediction of flexible manipulators using radial basis function neural network and dynamic surface control method. PloS one, 20(2), e0318601.

50. Zhang, W. (2025). Predefined-Time Fuzzy Control for Robotic Manipulators Driven by Compliant Actuators. International Journal of Fuzzy Systems, 1-10.

51. Zhao, W., & et al. (2025). Disturbance Observer-Based Boundary Adaptive Event-Triggered Consensus Control of Multiple Flexible Manipulators. IEEE Transactions on Fuzzy Systems.

52. Muthusamy, P. K., & et al. (2025). Aerial manipulation of long objects using adaptive neuro-fuzzy controller under battery variability. Scientific Reports, 15(1), 1-20.

53. Yevsieiev, V., & et al. (2024). A Program for Analyzing the Structure of a Web site Development Using the Parsing Method Based on the Python. Journal of Universal Science Research, 2(4), 172-183.

54. Gurin, D., & et al. (2024). Web site reliability analysis using the python parsing method. Journal of Universal Science Research, 2(5), 113-126.

55. Maksymova, S., & et al. (2025). Microchip Marking Recognition and Identification Using a Computer Vision System Mathematical Model. Multidisciplinary Journal of Science and Technology, 5(4), 321-330.

56. Yevsieiev, V., & et al. (2024). Building a traffic route taking into account obstacles based on the A-star algorithm using the python language. Technical Science Research In Uzbekistan, 2(3), 103-112.